PK1426A1-25.6V205Ah Explosion-Proof LiFePO₄ Battery Pack

The PK1426A1 is a high-capacity, explosion-proof lithium iron phosphate (LiFePO₄) battery system engineered specifically for specialised industrial equipment operating in hazardous environments – including forestry logging machinery, mining equipment, oil and gas field machinery, and other applications where explosive gases, dust, or volatile conditions exist.

Nominal Voltage
25.6V
Rated Capacity
205Ah @ 0.3C, 25°C
Minimum Capacity
200Ah @ 0.3C, 25°C

Product Overview

The PK1426A1 is a high-capacity, explosion–proof lithium iron phosphate (LiFePO₄) battery system engineered specifically for specialised industrial equipment operating in hazardous environments – including forestry logging machinery, mining equipment, oil and gas field machinery, and other applications where explosive gases, dust, or volatile conditions exist.

The system integrates 3.2V 205Ah large–format prismatic LiFePO₄ cells in a 1P8S configuration (8 cells in series), delivering a nominal 25.6V with 205Ah rated capacity – an exceptional 5.25kWh of stored energy – providing the high energy and robust power required for heavy-duty industrial operations.

The battery is housed in a purpose–built explosion–proof enclosure with an integrated explosion–proof cover and built–in fire suppression device (fire extinguishing cartridge) , providing the highest level of safety for personnel and equipment in hazardous environments.

An intelligent Battery Management System (BMS) monitors voltage, current, temperature, and state of charge in real time, providing comprehensive protection against overcharge, over-discharge, overcurrent, short circuit, and temperature extremes – ensuring safe and reliable operation in the most demanding conditions.

Technical Specifications

ModelJYHYLFP-PH25.6V205Ah
Cell ChemistryLiFePO₄ (Lithium Iron Phosphate)
Cell ModelJYHYLEP-205Ah (Large-format Prismatic)
Configuration1P8S (8 cells total)
Nominal Voltage25.6V
Rated Capacity205Ah @ 0.3C, 25°C
Minimum Capacity200Ah @ 0.3C, 25°C
Standard Charge Current100A
Charge Cut-off Voltage29.2V (cell limit 3.65V)
Standard Discharge Current50A
Discharge Cut-off Voltage20.8V (cell limit 2.6V)
Continuous Discharge Current80A @ 15–45°C
Max. Short-Term Discharge Current150A @ 15–45°C, ≤3s
Peak Discharge Current300A @ 15–45°C, ≤200ms
Standard Charge Time~3.5 hours
Cycle Life≥2000 cycles (to 70% capacity)
Communication InterfaceCAN (125K baud rate)
Charge/Discharge PortEV cable 25mm² – explosion-proof connector
Enclosure TypeExplosion-proof housing
Enclosure ColourIndustrial Grey
Dimensions (L×W×H)650mm × 195mm × 409mm (±1mm)
Weight~50 kg

Communication Port Pinout – 4-Pin Connector

PinFunctionPinFunction
1KEY+3Vehicle CAN H
2KEY-4Vehicle CAN L

Key features:

CAN communication – standard protocol, 125K baud rate

Key–switch control – KEY+/KEY- for remote ON/OFF

Explosion–proof connector – ensures safe connection in hazardous environments

Explosion-Proof Design & Safety Features

🔒 Explosion-Proof Enclosure

🧯 Built-In Fire Suppression Device (Fire Extinguishing Cartridge)

🛡️ Explosion-Proof Cover

🔌 Explosion-Proof Connectors

BMS Protection & Monitoring

The BMS provides comprehensive protection with the following features:

Overcharge protection

Cell voltage monitoring, cut-off at 3.65V/cell

Over-discharge protection

Prevents deep discharge, cut-off at 2.6V/cell

Overcurrent protection

Dual-level protection for charge and discharge

Short circuit protection

Instantaneous response

High / Low temperature protection

Ensures safe operation across temperature extremes

Cell imbalance protection

Maintains uniform cell performance

BMS accuracy

≤ ±5%

LiFePO₄ Chemistry & Safety – Key Advantages for Hazardous Environments

AdvantageBenefit for Forestry, Mining & Industrial Operations
🔒 Explosion–Proof DesignCertified explosion-proof housing – safe operation in hazardous atmospheres
🧯 Built–In Fire SuppressionIntegrated extinguishing cartridge – automatic fire protection
🛡️ LiFePO₄ SafetyInherently thermally stable chemistry – no thermal runaway risk
🔋 High Capacity205Ah / 5.25kWh – powers heavy-duty machinery for extended shifts
⚡ High Power300A peak – handles demanding hydraulic and drive requirements
🔄 2000+ Cycle LifeExceptional longevity – reduces total cost of ownership
❄️ Wide Temperature Range-20°C to 60°C discharge – reliable in extreme outdoor conditions
🏭 Robust Construction~50kg heavy-duty design – built to withstand vibration and shock

Key Features

Explosion-Proof Safety System

The PK1426A1 features a comprehensive safety system specifically designed for hazardous environments:

  • Explosion–proof enclosure – contains internal ignition
  • Explosion–proof cover – seals against external ignition sources
  • Built–in fire extinguishing cartridge – automatic fire suppression
  • Explosion–proof connectors – safe electrical connections in hazardous atmospheres
Key-Switch ON/OFF Control

Remote power control via KEY+/KEY- interface:

Power ON: Short KEY+/KEY- → system powers on

Power OFF: Open KEY+/KEY- → system shuts down

CAN Communication

Industry-standard CAN bus communication (125K baud rate) enables seamless integration with industrial equipment control systems, providing real-time battery status monitoring, fault diagnosis, and intelligent power management.

High Power Capability

With 300A peak discharge current and 150A short–term discharge capability, this battery supports the demanding power requirements of heavy-duty forestry and industrial machinery during:

  • Hydraulic system operation
  • Heavy lifting and loading
  • Incline climbing and traction
  • Simultaneous multiple load operations

Operating Conditions

ConditionTemperature Range
Charging0°C to 55°C
Discharging-20°C to 60°C
Storage0°C to 45°C (optimum 15–25°C)

Typical Applications

Forestry Logging Machinery

Harvesters, forwarders, skidders

Mining Equipment

Underground loaders, haul trucks, shuttle cars

Oil & Gas Field Machinery

Drilling equipment, pump jacks

Explosion-Prone Industrial Environments

Chemical plants, grain handling, dust-laden environments

Heavy-Duty Industrial Equipment

Requiring explosion-proof certification

Specialised Mobile Machinery

Operating in hazardous classified areas

Why Choose the PK1426A1 for Hazardous Environments?

🔒 Explosion-Proof Enclosure

Certified safe operation in hazardous atmospheres

🧯 Built-In Fire Suppression

Automatic fire extinguishing – protects personnel and equipment

🔋 205Ah High Capacity

5.25kWh energy – extended shift operation

⚡ 300A Peak Discharge

Powers heavy-duty hydraulic and drive systems

📡 CAN Communication

Full integration with equipment control systems

🔑 Key-Switch Control

Simple, reliable power management

🔄 2000+ Cycle Life

Exceptional longevity – reduced TCO

❄️ Wide Temperature Range

-20°C to 60°C – reliable in extreme conditions

🏭 Industrial Grey Finish

Professional appearance, corrosion-resistant finish

🔧 Customisable

Voltage, capacity, connectors, and communication protocols can be tailored

Forestry Logging Machinery – Application Focus

Forestry operations present unique challenges for battery systems:

01
–

Dust and debris

Logging operations generate significant airborne particulates

02
–

Vibration and shock

Rough terrain and heavy machinery operation

03
–

Temperature extremes

From sub-zero winters to hot summers

04
–

Fuel ignition hazards

Potential presence of flammable vapours and dust

The PK1426A1 is specifically designed to address these challenges:

01
–

Explosion-proof enclosure

Prevents ignition of dust and vapours

02
–

Built-in fire suppression

Provides immediate protection in case of internal failure

03
–

Robust construction

Withstands the mechanical stresses of forestry operations

04
–

Wide temperature range

Ensures reliable operation in all seasons

Notes & Warnings

Ordering Information

For customisation (different capacity, voltage, connectors, communication protocols, or explosion-proof certification requirements), please provide your application details – including operating environment classification, load profile, duty cycle, and desired interface. Engineering support is available for tailored solutions.

Reach out for customised
consulting services.

Would You like Information About Our Products?

Select one or more products to receive specific details, or write your message freely.