Product Overview
The PK137 is a robust, high-capacity lithium iron phosphate (LiFePO₄) battery system engineered specifically for electric forklifts and industrial material handling equipment. Featuring a 2P8S configuration (2 parallel, 8 series) of 3.2V 30Ah soft-pack cells, this battery delivers a nominal 25.6V with 60Ah rated capacity – over 1.5kWh of stored energy – providing reliable, long-lasting power for demanding warehouse and logistics operations.
The soft-pack prismatic cell design offers excellent thermal management, low internal resistance, and high energy density in a compact form factor, making this battery an ideal drop-in replacement for traditional lead-acid batteries in Class I, II, and III electric forklifts.
An intelligent Battery Management System (BMS) monitors voltage, current, temperature, and state of charge in real time, providing comprehensive protection against overcharge, over-discharge, overcurrent, short circuit, and temperature extremes – ensuring safe and reliable operation throughout the work shift.
The battery features separate charge and discharge ports, RS485 communication for integration with forklift control systems, and key–switch control for remote ON/OFF operation.
Technical Specifications
| Model | JYHYLFP-25.6V60Ah |
| Cell Chemistry | LiFePO₄ (Lithium Iron Phosphate) |
| Cell Model | JYHYLFP-30Ah (Soft-pack Prismatic) |
| Configuration | 2P8S (16 cells total) |
| Nominal Voltage | 25.6V |
| Rated Capacity | 60Ah @ 0.2C, 25°C |
| Minimum Capacity | 58.2Ah @ 0.2C, 25°C |
| Standard Charge Current | 30A |
| Max. Continuous Fast Charge Current | 30A @ 25–45°C |
| Charge Cut–off Voltage | 29.2V |
| Standard Discharge Current | 40A |
| Discharge Cut–off Voltage | 20.8V |
| Continuous Discharge Current | 100A (≤3s) |
| Peak Discharge Current | 100A (≤3s) |
| Standard Charge Time | ~2.5 hours (at 30A) |
| Cycle Life | ≥2000 cycles (to 80% capacity) |
| Communication Interface | RS485 |
| Charge Port | GX16-2 Pin (Panel-mounted) |
| Discharge Port | Anderson SB50A (Grey, panel-mounted) |
| Communication Port | GX16-8 Pin (1,000mm lead) |
| Enclosure Material | Powder-coated steel, Black finish |
| Dimensions (L×W×H) | As per design (refer to dimensional drawing) |
| Weight | (Specify as per actual unit) |
Interface Description
Communication Port – GX16-8 Pin
The RS485 communication interface enables seamless integration with forklift control systems for real-time battery monitoring:
RS485 A/B – communication with vehicle controller
Key–switch lines – KEY+ / KEY- for remote ON/OFF control
1,000mm lead – flexible routing for various vehicle configurations
Power Ports
| Port | Connector | Function |
| Charge Port | GX16-2 Pin | Dedicated charging input |
| Discharge Port | Anderson SB50A (Grey) | High-current power output to forklift drive system |
BMS Protection & Monitoring
The BMS provides comprehensive protection with the following key thresholds:
| Parameter | Threshold | Action |
| Total Voltage Over–charge | 29.2V | Stop charging |
| Total Voltage Over–charge Recovery | 28.4V | Re-enable charging |
| Total Voltage Under–discharge | 20.8V | Stop discharging |
| Total Voltage Under–discharge Recovery | 21.6V | Re-enable discharging |
| Discharge Overcurrent 1 | 50A | Alarm |
| Discharge Overcurrent 2 | 60A | Immediate discharge cut-off |
| Charge Overcurrent | 40A | Alarm |
| Cell Over–charge | 3.65V/cell | Stop charging |
| Cell Over–charge Recovery | 3.55V/cell | Re-enable charging |
| Cell Under–discharge | 2.6V/cell | Stop discharging |
| Cell Under–discharge Recovery | 2.7V/cell | Re-enable discharging |
| Discharge High Temp | 60°C | Alarm |
| Charge High Temp | 55°C | Alarm |
| Discharge Low Temp | -15°C | Alarm |
| Charge Low Temp | -5°C | Alarm |
| Short Circuit Protection | 500A | Immediate cut-off |
BMS accuracy: High-precision monitoring with configurable alarm thresholds
LiFePO₄ Chemistry – Key Advantages for Electric Forklifts
| Advantage | Benefit for Forklift Operations |
| 🔄 2000+ Cycle Life | 5× longer than lead-acid – eliminates daily watering and maintenance |
| ⚡ High Power Capability | 100A peak discharge – supports heavy lifting and ramp climbing |
| 🔋 Flat Discharge Curve | Consistent power output throughout the shift – no voltage sag |
| 🛡️ Intrinsic Safety | No thermal runaway risk – safe for warehouse environments |
| 📐 Lightweight Design | Significantly lighter than lead-acid – reduces forklift weight and extends runtime |
| 🔌 Opportunity Charging | Can be charged during breaks without damaging battery life |
Key Features
Remote power control via key-switch lines:
Power ON: Close key-switch → system powers on
Power OFF: Open key-switch → system shuts down
Charge port – GX16-2 dedicated charging input
Discharge port – Anderson SB50A high-current output
Separate ports – allows independent control and eliminates connector confusion
Real-time battery status monitoring via RS485:
- SOC, voltage, current, and temperature data
- Protection and alarm status
- Seamless integration with forklift controllers
With 100A peak discharge current, this battery supports demanding forklift operations including:
- Heavy payload lifting
- Incline and ramp climbing
- Rapid acceleration
- Multi-shift operations with opportunity charging
Operating Conditions
| Condition | Temperature Range |
| Charging | 0°C to 45°C |
| Discharging | -20°C to 55°C |
| Storage | -10°C to 40°C (optimum 15–25°C) |
Typical Applications
2,000–4,000kg capacity
Reach trucks, order pickers
Walkie stackers, pallet trucks
Baggage tugs, industrial tow vehicles
AGV, shuttle systems
For traditional 24V lead-acid battery systems
Why Choose the PK1656-00 for Underwater Robotics?
1.5kWh+ energy – extends shift runtime vs. lead-acid
5× longer lifespan – dramatically reduces TCO
Supports heavy lifting and demanding operations
Industry-standard interfaces – easy integration
Full battery data to forklift control system
Simple remote ON/OFF operation
No acid spills, no thermal runaway – safer warehouses
Quicker, easier battery swaps – reduces operator fatigue
Top-up during breaks – no need for full 8-hour charges
Excellent thermal performance and long-term reliability
Advantages Over Lead-Acid Batteries
| Feature | PK137 LiFePO₄ | Lead-Acid Battery |
| Cycle Life | ≥2000 cycles | ~500 cycles |
| Charge Time | ~2.5 hours | ~8 hours |
| Maintenance | None (no watering) | Regular watering, equalising |
| Opportunity Charging | Yes | Damages battery |
| Weight | ~50% lighter | Heavy |
| Acid Spills | No | Risk of corrosion |
| Energy Efficiency | ~95% | ~70–75% |
Notes & Warnings
- Use only the specified charger (29.2V, 30A, CC-CV).
- Charge only when battery temperature is between 0°C and 45°C.
- Discharge only when temperature is between -20°C and 55°C.
- Do not over–discharge – recharge within 24 hours after full discharge.
- For storage exceeding 3 months, maintain at ~50% SOC (approx. 25.6V).
- Storage voltage per cell: 3.2–3.3V.
- Do not connect batteries in series or parallel without proper engineering assessment.
- Separate charge/discharge ports – do not confuse the charging and discharging connectors.Ensure the key-switch is turned OFF during storage and maintenance.
Ordering Information
For customisation (different capacity, voltage, connectors, communication protocols, or mechanical dimensions), please provide your application details – including forklift model, operating profile, shift duration, and ambient conditions. Engineering support is available for tailored solutions.