Product Overview
The PK1656-00 is a compact, high-reliability lithium iron phosphate (LiFePO₄) battery system engineered specifically for underwater robotics – including ROVs, AUVs, and other subsea platforms. Featuring a 4P16S configuration (4 parallel, 16 series) of 3.2V 5Ah cells, this battery delivers a nominal 51.2V with 20Ah rated capacity – over 1kWh of stored energy in a compact form factor ideal for space-constrained underwater vehicles.
The system adopts a common–port design – both charging and discharging are handled through a single Anderson-style connector, simplifying system integration and reducing cabling complexity for underwater vehicle designers.
An intelligent Battery Management System (BMS) monitors voltage, current, temperature, and state of charge in real time, providing comprehensive protection against overcharge, over-discharge, overcurrent, short circuit, and temperature extremes – ensuring safe and reliable operation throughout subsea missions.
The battery features RS485 communication with a user-configurable protocol, enabling seamless integration with underwater vehicle control systems for real-time battery monitoring and intelligent power management.
Technical Specifications
| Model | JYHYLFP-LWN51.2V20Ah |
| Cell Chemistry | LiFePO₄ (Lithium Iron Phosphate) |
| Cell Model | JYHYLFP-5Ah |
| Configuration | 4P16S (64 cells total) |
| Nominal Voltage | 51.2V |
| Rated Capacity | 20Ah @ 0.3C, 25°C |
| Minimum Capacity | 19Ah @ 0.3C, 25°C |
| Standard Charge Current | 10A |
| Charge Cut-off Voltage | 58.4V (cell limit 3.65V, programmable) |
| Standard Discharge Current | 20A |
| Discharge Cut-off Voltage | 41.6V (cell limit 2.6V, programmable) |
| Continuous Discharge Current | 20A |
| Max. Discharge Current | 30A @ 15–45°C, <10s |
| Peak Discharge Current | 35A @ 15–45°C, ≤3s |
| Standard Charge Time | ~2.5 hours |
| Cycle Life | ≥2000 cycles (to 80% capacity) |
| Communication Interface | RS485 |
| Communication Connector | 2506H-05 (KEY1/2, RS485 A/B) |
| Charge/Discharge Port | Anderson SB50A (Common Port, AWG9, 200mm) |
| Enclosure Material | Q235 steel, Far Mountain Blue finish |
| Dimensions (L×W×H) | Customised to customer specification |
Interface Description
Communication Port – 2506H-05
| Pin | Function | Pin | Function |
| 1 | KEY1 | 3 | RS485 B |
| 2 | KEY2 | 4 | RS485 A |
Key features:
RS485 communication – user-configurable protocol for seamless system integration
Key–switch control – KEY1/KEY2 for remote ON/OFF
Common–port design – single Anderson SB50A connector for both charge and discharge
Power Port – Common Port Design
- Charge and discharge share the same Anderson SB50A connector
- AWG9, 200mm lead length
- Common–port design simplifies integration – reduces cabling complexity and connector count
BMS Protection & Monitoring
The BMS provides comprehensive protection with the following features:
Cell voltage monitoring, cut-off at 3.65V/cell
Prevents deep discharge damage, cut-off at 2.6V/cell
Protects against excessive charge/discharge currents
Instantaneous response
Ensures safe operation across temperature extremes
Maintains uniform cell performance
≤ ±5%
Communication & data monitoring via RS485:
LiFePO₄ Chemistry – Key Advantages for Underwater Robotics
The PK1656-00 utilises LiFePO₄ (Lithium Iron Phosphate) technology, offering distinct advantages specifically tailored for underwater robotic applications:
| Advantage | Benefit for Underwater Robots |
| 🛡️ Intrinsic Safety | LiFePO₄ chemistry is inherently thermally and chemically stable – critical for subsea operations |
| 🔄 Exceptional Cycle Life | ≥2000 cycles to 80% capacity – significantly reduces total cost of ownership for fleet operations |
| 📦 Compact Form Factor | High energy density in a small package – ideal for spaceconstrained underwater vehicles |
| 🔋 Flat Discharge Curve | Stable voltage output throughout the discharge cycle – consistent thruster performance |
| ❄️ Wide Temperature Range | Discharge from -20°C to 60°C – suitable for diverse underwater environments |
| 🔗 4P16S Configuration | 4parallel cells provide redundancy and improved current handling capability |
Key Features
Remote power control via KEY1/KEY2 interface:
Power ON: Short KEY1/KEY2 → system powers on
Power OFF: Open KEY1/KEY2 → system shuts down
Single port for both charging and discharging – simplifies integration and reduces cabling
Anderson SB50A connector – robust, field-proven connector rated for high current and repeated mating cycles
AWG9, 200mm lead – flexible and easy to route within underwater vehicle housings
RS485 communication with user-configurable protocol enables seamless integration with underwater vehicle control systems, providing real-time battery status monitoring, fault diagnosis, and intelligent power management.
The 4-parallel, 16-series configuration provides:
- Enhanced current handling capability
- Improved system reliability – redundancy in cell-parallel groups
- Higher nominal voltage (51.2V) – compatible with a wide range of underwater vehicle power systems
Operating Conditions
| Condition | Temperature Range |
| Charging | 0°C to 55°C |
| Discharging | -20°C to 60°C |
| Storage | 0°C to 45°C (optimum 15–25°C) |
Typical Applications
Inspection, intervention, and construction
Survey, mapping, and data collection
Pipeline, cable, and infrastructure inspection
Oceanographic research and environmental monitoring
Surface support and autonomous navigation
Reconnaissance and surveillance
Where space and weight are critical constraints
Why Choose the PK1656-00 for Underwater Robotics?
1kWh+ energy – supports extended mission durations
Exceptional longevity – reduces battery replacement frequency and TCO
Single Anderson connector for charge and discharge – simplifies integration
User-configurable protocol – seamless integration with vehicle control systems
Simple, reliable power management for remote and autonomous operations
Intrinsically safe chemistry – no thermal runaway risk
-20°C to 60°C discharge – suitable for diverse underwater environments
High energy density – ideal for space-constrained underwater vehicles
Voltage, capacity, connectors, and communication protocols can be tailored
Built with high-quality 5Ah LiFePO₄ cells and robust BMS design
Notes & Warnings
- Use only the specified charger (58.4V, 10A, CC-CV).
- Charge only when battery temperature is between 0°C and 55°C.
- Discharge only when temperature is between -20°C and 60°C.
- Do not over–discharge – recharge within 24 hours after full discharge.
- For storage exceeding 2 months, maintain at ~50% SOC (approx. 51.2V).
- Storage voltage per cell: 3.2–3.35V.
- Do not connect batteries in series without proper engineering assessment.
- Common–port operation – the charge and discharge functions share the same connector. Ensure proper voltage and polarity when connecting to chargers and loads.
- Waterproofing – while the battery is designed for underwater vehicle integration, the battery housing itself is not intended for direct submersion without additional encapsulation. Ensure proper integration into the vehicle’s pressure-tested battery compartment.
- Pressure compensation – for deep-water applications, consult with our engineering team regarding pressure-compensated design options.Anderson connector – ensure mating connector is properly terminated with AWG9 or equivalent cable and is securely locked before operation.
Ordering Information
For customisation (different capacity, voltage, connectors, or communication protocols), please provide your application details (load profile, duty cycle, ambient conditions, and desired interface). Engineering support is available for tailored solutions.